Elevator Controller & Relay Repair Tempe, AZ | AZ Elevator Solutions

Elevator-Controller-Relay-Repair-Tempe-AZ

Elevator relays are dependable devises that consist of electromagnets that open and close contacts which routes the logic to circuits. A basic elevator with only a few stops and manual operation of elevator door is perfectly served by relay controllers. Complex elevators can use relays too and they were until 1980. Although, the sheer number of elevator relays needed make it harder to troubleshoot relay problems if they ever arise. We provide elevator controller repair and elevator relay repair in Tempe, AZ and the rest of the Phoenix Valley.

Types Of Elevator Controllers We Repair

1

There are 3 different types of elevator controllers, including relay, solid state logic, and PLC elevator controllers. Learn more about each below.

Relay Elevator Controller

1

Relay controllers consist of electromagnets that open and close dry contacts, and routes the logic to other circuits. Relay controllers are best suited for elevators that only have a few stops and use manual door operation. Although, relays can also be used for complex eleavtors, and they were until the 1980’s/ However, the sheer number of relays that are required for newer elevators make it a problem to troubleshoot in the midst of a problem.

Relay Elevator Controller Applications

  • Single Lift Elevators
  • Drive Speeds That Are 1m/s or less
  • Commercial Buildings That Are Low-Rise (Hospitals, Hotels, Offices)
  • Passenger lifts in 3 Story Or Less Buildings (Nursing Homes, Small Hotels, Residential Buildings)

Solid State Elevator Controller

1

Solid state logic elevator controllers include integrated circuit boards and transistors circuits. It provides easy fault diagnosis, lower power consumption and improved reliability over relay controllers.

Solid State Elevator Controller Applications

  • Duplex Groups & Single Lift Elevators
  • Drive Speeds That Are 2m/s or less
  • Passenger lifts in 12 Story Or Less Buildings (Small Hotels, Residential Buildings)
  • Commercial Buildings That Are Low-Rise (Hospitals, Hotels, Offices)

PLC Elevator Controller

1

Microprocessing technology is more affordable than ever thanks to the advent of personal computers. PLC Elevator controller use microprocessor technology to control logic on more complex elevator situations.

PLC Elevator Controller Applications

  • All Types Of Elevator Lifts
  • Any drive speed 10m/s or less
  • All Sizes Of Lift Groups

What Is An Elevator Controller

1

An elevator controller is a electronic device that manages visual monitoring, traffic analysis system and interactive command control to make sure your elevators are functioning properly.

The main function of elevator controllers are to receive/process signals from a variety of elevator components. It’s able to send response signals to signals it receives in order for operation of other parts in the system. This exchanging of signals is how elevator controllers keep the elevator running efficiently day in-day out.

How Elevator Controllers Interact With Other Components

1

  • Control the speed of the elevator engine to move cabs up and down their shafts
  • Queue and process elevator floor requests provided by passengers through button pressing signals
  • Processes the information sent to the controller by load sensors to make sure the cab doesn’t exceed the safety weight limit
  • Process position marking information to always know where the elevator cabs are as well as the speed they are traveling at
  • Provides lit feedback to elevator passengers through button lights, floor number displays and direction displays
  • Can set off alarm bells invoked by passengers or excess load signals
  • Controls the door opening device for operation of elevator doors

Call Us For Elevator Controller Repair & Upgrades

1

If you are looking for elevator relay repair or elevator controller repair in Tempe, AZ, you have found the place. AZ Elevator Solutions in Tempe, AZ can repair, upgrade, or modernize your Relay based elevator controller (w/ electromechanical switching). Give us a call today at 602-515-7379 or fill out our short contact form on our website to schedule your repair.

Summary
Elevator Controller & Elevator Relay Repair
User Rating
5 based on 1 votes
Service Type
Elevator Controller & Elevator Relay Repair
Provider Name
AZ Elevator Solutions,
208 S River Dr,Tempe,AZ-85281,
Telephone No.602-515-7379
Area
Tempe, AZ
Description
AZ Elevator Solutions in Tempe, AZ can repair, upgrade, or modernize your Relay based elevator controller (w/ electromechanical switching).

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.